No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6645-00-960-6594
NSN 5975-01-204-4476
NSN 5999-01-424-2950
NSN 6130-01-583-9874
NSN 6685-01-044-5044
NSN 6145-00-472-9413
NSN 2925-00-468-5273
NSN 5905-00-997-0305
NSN 6685-00-221-5750
NSN 5920-01-207-2381
NSN 2925-00-120-9302
NSN 6685-01-254-0485