No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of leather or composition leather, nesoi
NSN 6135-00-593-6831
NSN 5999-01-211-6671
NSN 5960-01-346-3377
NSN 6620-00-977-3779
NSN 7035-01-406-6510
NSN 7035-00-991-6877
NSN 6610-00-063-8489
NSN 5915-00-480-5163
NSN 5835-01-595-4099
NSN 5985-00-958-9651
NSN 5965-00-706-7005
NSN 5998-00-679-4001