No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5965-01-411-9933
NSN 7035-01-624-2095
NSN 6610-00-199-8915
NSN 5975-01-382-3969
NSN 6145-01-552-6147
NSN 5935-01-576-8574
NSN 6685-00-444-6500
NSN 6650-00-463-1514
NSN 6145-01-035-5528
NSN 6105-00-556-0477
NSN 6130-01-643-3460
NSN 5925-00-391-5362