No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6145-00-663-6133
NSN 5960-01-237-2336
NSN 6135-01-540-2403
NSN 5950-00-223-2910
NSN 5925-00-785-6260
NSN 6150-01-411-6299
NSN 5910-00-490-3943
NSN 5930-01-359-4029
NSN 6220-01-364-8666
NSN 5925-00-617-8313
NSN 6650-00-221-9425
NSN 6610-01-081-7532