A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6130-01-629-4900
NSN 6685-01-178-0979
NSN 6610-01-109-8552
NSN 6650-01-416-0473
NSN 6145-01-628-7160
NSN 5935-01-394-5187
NSN 5915-00-402-8186
NSN 5855-01-047-9267
NSN 6110-00-927-5436
NSN 5965-01-157-7732
NSN 5975-00-702-4062
NSN 5990-01-476-8813