No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 4140-01-400-3610
NSN 5910-01-479-8094
NSN 5945-01-310-1847
NSN 6685-01-455-3808
NSN 5950-01-455-4215
NSN 5920-00-947-7393
NSN 5925-01-314-7236
NSN 2925-01-359-9818
NSN 6685-00-997-0927
NSN 6320-00-593-0379
NSN 5925-00-272-7002
NSN 6610-01-605-2451