No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6685-01-032-5241
NSN 5996-01-191-8758
NSN 5910-00-820-8442
NSN 6150-01-634-0575
NSN 5855-01-464-3152
NSN 6240-01-582-5803
NSN 6130-00-042-3809
NSN 5999-00-823-5001
NSN 5975-00-148-0914
NSN 6135-00-542-6216
NSN 5999-01-197-7799
NSN 5985-01-597-5374