No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-173-5000
NSN 5965-00-080-2045
NSN 5835-01-647-6426
NSN 5905-01-451-6512
NSN 5998-01-122-7784
NSN 5930-00-067-7347
NSN 2925-01-633-0225
NSN 2925-01-372-9455
NSN 6645-00-344-3512
NSN 7035-01-510-8787
NSN 6685-01-634-0611
NSN 5998-00-270-1179