No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5990-00-332-9426
NSN 7035-01-090-3369
NSN 6650-01-254-6540
NSN 5930-01-048-4334
NSN 5999-00-758-2723
NSN 6130-00-441-9132
NSN 5996-00-142-9033
NSN 5985-01-446-6756
NSN 5895-01-065-2336
NSN 5960-01-333-8428
NSN 6150-01-142-0229
NSN 6685-01-102-8358