A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 6685-00-705-6071
NSN 5945-01-218-5645
NSN 5920-00-904-9156
NSN 4140-01-171-7013
NSN 5935-00-955-5913
NSN 6135-00-643-4843
NSN 5999-00-445-1604
NSN 6105-00-368-0066
NSN 5925-00-545-8022
NSN 6130-01-312-7954
NSN 5985-00-314-5213
NSN 6145-01-555-8131