A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 6320-00-504-1214
NSN 6150-00-233-9459
NSN 2925-01-359-4027
NSN 5920-00-800-5021
NSN 6685-01-312-3619
NSN 6105-01-625-1169
NSN 5950-00-053-1679
NSN 5920-00-990-9727
NSN 5905-01-266-9922
NSN 6650-01-356-5947
NSN 5895-01-046-4382
NSN 5985-01-432-2483