No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-01-200-7153
NSN 5950-00-837-1114
NSN 5990-01-421-5342
NSN 6145-01-020-9875
NSN 5990-01-588-3999
NSN 6135-00-990-1822
NSN 5990-01-574-2522
NSN 6105-00-993-5244
NSN 5920-01-019-1989
NSN 6105-01-491-8072
NSN 5895-01-162-0218
NSN 7035-00-193-2269