No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-00-877-8668
NSN 6645-01-447-3143
NSN 6320-01-203-9864
NSN 5935-01-525-4686
NSN 5996-00-476-4442
NSN 6650-01-516-3631
NSN 6650-01-660-5441
NSN 5915-01-445-6577
NSN 5915-01-317-8633
NSN 5990-00-067-6791
NSN 6130-00-567-9424
NSN 5835-00-193-8951