No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6130-01-421-2705
NSN 5920-01-573-2540
NSN 5985-01-555-4226
NSN 5965-01-155-0811
NSN 5855-01-224-7975
NSN 5998-00-633-5169
NSN 6620-01-085-8688
NSN 5835-00-631-5762
NSN 6610-01-633-8931
NSN 6620-00-140-8644
NSN 5855-01-175-3990
NSN 4140-00-045-8117