1st end has 2 keyways cut 180 degrees apart, 0.093 in.Wide by 0.052 in.Dp by 0.875 in.Lg
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5935-00-193-7939
NSN 5985-00-072-1640
NSN 5998-01-441-8541
NSN 7035-01-218-6960
NSN 6650-01-395-5991
NSN 2925-01-399-2765
NSN 5990-00-665-4105
NSN 5935-00-848-2220
NSN 6610-01-477-6476
NSN 5950-01-331-9773
NSN 5960-01-564-5044
NSN 5999-00-125-9448