1st end has 2 keyways cut 180 degrees apart, 0.093 in.Wide by 0.052 in.Dp by 0.875 in.Lg
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5895-01-484-7243
NSN 5835-00-284-0882
NSN 6130-01-269-0500
NSN 5998-00-580-2837
NSN 5990-01-216-1276
NSN 6150-01-556-2545
NSN 7035-00-834-2090
NSN 5960-00-287-9932
NSN 5975-01-584-3805
NSN 5935-01-178-6860
NSN 5945-01-512-1533
NSN 5950-00-872-6310