1/2 circle shape less 7/8 in. Each side
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5945-01-009-5303
NSN 6610-00-080-2985
NSN 6240-00-526-0243
NSN 5895-00-104-4583
NSN 5905-01-297-9400
NSN 5895-00-520-4690
NSN 6620-01-006-4899
NSN 6110-00-130-5342
NSN 5835-00-869-9288
NSN 6320-00-646-3311
NSN 6240-00-863-6105
NSN 5996-01-505-6099