Has a 1.312 in. Lg by 0.750 in. W tab with a 0.312 in. Diameter hole
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5998-01-227-2416
NSN 6320-00-313-9114
NSN 5960-01-498-9427
NSN 6645-00-200-2324
NSN 7035-00-991-6877
NSN 5950-01-037-5601
NSN 6650-01-563-5287
NSN 6110-01-483-7959
NSN 5990-00-451-7630
NSN 6220-01-590-7272
NSN 5935-00-990-5582
NSN 5855-00-912-3885