First end six notches radially spaced at 60 deg, 0.453 in. Notch mjr dia, 0.281 in. Notch min dia, 0.200 in. Notch lg; first end bore, 0.281 in. Bore dia, 0.125 in. Bore dp; second end unthd cross drilled through hol, 0.630 in. Hole dia, 0.435 in. Distance from hole c to end
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6130-00-209-6716
NSN 5935-01-647-6921
NSN 6130-01-256-3484
NSN 5990-01-426-7350
NSN 4140-01-456-9471
NSN 5915-01-097-5480
NSN 5920-01-617-7318
NSN 5965-01-231-9125
NSN 5990-01-408-6554
NSN 5999-01-423-3269
NSN 6240-00-902-9310
NSN 5985-01-309-2109