A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-01-468-5576
NSN 6320-00-242-3300
NSN 5996-00-164-7288
NSN 6240-01-449-2883
NSN 6650-01-093-6862
NSN 6150-00-371-9431
NSN 6135-01-309-8414
NSN 6650-00-866-9947
NSN 6130-01-574-8417
NSN 5990-01-485-0260
NSN 5905-01-031-6927
NSN 6145-01-484-8735