No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5895-01-210-0492
NSN 2925-00-788-0043
NSN 5999-01-421-3388
NSN 4140-01-276-0949
NSN 5945-01-053-5624
NSN 5930-01-158-4028
NSN 4140-00-358-1751
NSN 5975-01-093-9063
NSN 5998-01-242-5246
NSN 2925-00-928-5931
NSN 6145-00-005-1018
NSN 5960-00-420-0418