A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Articles of plastics & articles of other materials of heading 3901 to 3914, nesoi
NSN 5935-01-513-4962
NSN 5910-01-287-2267
NSN 5920-01-251-2358
NSN 6145-01-237-3496
NSN 5945-01-472-2099
NSN 2925-00-968-9594
NSN 5999-01-303-6569
NSN 2925-01-545-2717
NSN 5910-00-097-7447
NSN 7035-01-462-5766
NSN 5925-00-826-8887
NSN 5910-00-424-3803