A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6320-00-360-1744
NSN 6135-00-985-7887
NSN 5915-00-471-6131
NSN 5975-00-932-5591
NSN 5996-01-483-1032
NSN 5996-01-607-7035
NSN 6650-01-508-3651
NSN 5920-01-323-4821
NSN 5990-00-357-8103
NSN 5990-00-006-5760
NSN 6620-01-444-8261
NSN 6130-00-553-8758