A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Dept. of the Navy 
Canada 
Italy 
Turkey Classification: Gaskets, washers and other seals, of vulcanized rubber other than hard rubber
NSN 5910-01-254-2162
NSN 5945-01-190-7327
NSN 2925-01-311-7840
NSN 5965-01-039-1430
NSN 5975-00-207-3416
NSN 6240-01-084-3952
NSN 6650-01-399-8552
NSN 5935-01-605-0399
NSN 5855-01-246-4274
NSN 5930-00-455-3046
NSN 6240-01-173-7809
NSN 5996-01-495-0763