A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6320-00-284-1524
NSN 5935-01-014-5545
NSN 5910-01-507-0363
NSN 5855-00-138-2386
NSN 6130-00-482-1257
NSN 5910-01-494-7716
NSN 5920-01-425-2336
NSN 5965-01-241-9865
NSN 5935-01-509-1363
NSN 5910-00-052-0498
NSN 5930-01-660-6101
NSN 5999-01-281-7465