A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6685-01-394-6316
NSN 6240-01-437-9439
NSN 6320-01-547-2743
NSN 5985-00-164-3772
NSN 5975-00-333-9866
NSN 5895-01-158-9142
NSN 6145-01-564-6169
NSN 6135-01-163-0332
NSN 6105-01-394-4175
NSN 6650-00-762-5670
NSN 6105-01-241-9225
NSN 5996-01-508-7222