Surface opposite recess drilled 0.250 in. Deep for 0.188 in. Diameter pin, 0.438 in. Center of hole to center of pin hole and furnished w/headless pin
A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.
Classification: Washers other than lock washers, iron or steel
NSN 6320-01-422-1212
NSN 5975-01-269-0283
NSN 5915-01-437-8858
NSN 5930-01-474-8823
NSN 4140-01-161-4999
NSN 5985-00-288-6001
NSN 6110-00-876-1995
NSN 6145-00-099-8986
NSN 2925-01-052-0636
NSN 6135-01-426-8282
NSN 6645-00-246-4934
NSN 5950-01-363-2147