No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6610-00-401-2601
NSN 5945-01-626-4129
NSN 6620-00-626-5719
NSN 6645-00-819-5045
NSN 5895-01-454-4941
NSN 5990-01-240-1100
NSN 6610-01-204-7281
NSN 6150-01-116-4006
NSN 5999-01-617-2057
NSN 6105-01-110-7703
NSN 5920-01-394-0636
NSN 5998-01-308-4405