No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5925-01-376-5548
NSN 6645-00-439-4087
NSN 6650-01-659-5594
NSN 4140-01-330-0613
NSN 6620-01-558-6558
NSN 6650-00-054-4721
NSN 5835-01-123-8305
NSN 6610-01-122-0064
NSN 6145-00-934-0331
NSN 4140-00-904-8153
NSN 5835-01-299-5055
NSN 5895-01-106-4161