No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5925-01-599-8670
NSN 6150-01-007-7483
NSN 4140-01-012-1678
NSN 5935-00-467-1545
NSN 5930-01-029-7736
NSN 5998-00-486-6330
NSN 6220-01-388-0823
NSN 5975-01-544-4394
NSN 4140-00-185-9694
NSN 6110-00-494-7903
NSN 6150-01-452-3115
NSN 6240-01-546-8547