Chamfer one side at one end and left length 0.406 in. Wide by 45 deg
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
NSN 6105-01-385-7917
NSN 5985-00-960-5560
NSN 6105-01-225-6711
NSN 5999-01-645-4036
NSN 5935-00-957-5224
NSN 5905-01-485-0753
NSN 5998-01-220-3030
NSN 6645-00-971-2023
NSN 5975-00-351-3911
NSN 5985-01-525-2107
NSN 5985-00-442-9430
NSN 5920-01-446-4524