No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6685-01-579-1967
NSN 5855-00-337-3679
NSN 5910-01-109-5802
NSN 5835-01-319-0262
NSN 5998-01-326-0123
NSN 5985-00-275-7009
NSN 5835-01-576-9013
NSN 5935-00-111-2417
NSN 5835-01-367-4330
NSN 6650-01-371-2356
NSN 6610-00-442-6834
NSN 4140-01-166-9098