A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Dept. of the Air Force 
Dept. of the Navy 
Germany 
Republic of Korea 
Greece Classification: Bolts and bolts and their nuts or washers exported in the same shipment
NSN 5996-01-534-6918
NSN 7035-01-231-2450
NSN 5985-01-418-8821
NSN 5965-01-476-4228
NSN 5990-01-235-8404
NSN 5945-01-113-5902
NSN 5835-01-261-2978
NSN 5945-01-015-9000
NSN 6650-00-310-8786
NSN 5999-01-401-5322
NSN 6220-01-494-7073
NSN 6645-01-378-8907