Slotted one side along w 0.254 in. W, 0.265 in. Deep
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5996-00-803-0212
NSN 6105-00-549-2668
NSN 5905-00-534-7698
NSN 6650-01-057-2377
NSN 5855-00-560-0110
NSN 5985-01-624-7420
NSN 6645-00-105-7010
NSN 6220-01-132-7829
NSN 6135-01-322-4655
NSN 6620-00-893-1303
NSN 5960-01-507-9112
NSN 5905-01-440-9487