No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-740-4336
NSN 5905-01-043-1334
NSN 6220-01-044-5552
NSN 6610-01-627-8985
NSN 5945-01-472-4347
NSN 5960-01-316-4382
NSN 5855-01-510-9416
NSN 5835-01-464-2662
NSN 2925-00-603-3986
NSN 5905-01-173-5962
NSN 6620-01-329-7510
NSN 6610-01-189-0953