No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5855-01-165-6361
NSN 5905-00-101-2657
NSN 5910-01-196-5771
NSN 6650-01-059-5804
NSN 5945-00-215-4609
NSN 5895-01-035-0919
NSN 6135-01-176-2206
NSN 6620-00-468-3665
NSN 7035-01-268-8042
NSN 5910-00-089-9927
NSN 5895-01-442-0657
NSN 6650-00-273-8732