No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5990-01-448-2751
NSN 6610-01-607-8246
NSN 5998-01-418-0849
NSN 6110-00-657-4739
NSN 5960-01-065-0273
NSN 5998-00-355-7986
NSN 2925-01-351-9748
NSN 6110-01-197-2905
NSN 5835-01-324-6443
NSN 5905-01-092-3923
NSN 5905-00-706-3985
NSN 6110-00-004-8883