Weapon system essential
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5975-00-135-9299
NSN 5835-01-439-0180
NSN 5999-00-132-5586
NSN 5960-00-986-5060
NSN 5990-01-148-5326
NSN 5925-00-375-5468
NSN 5960-01-157-7009
NSN 5920-01-515-9610
NSN 5999-00-734-8221
NSN 6105-00-167-7576
NSN 6220-01-401-5337
NSN 5905-01-350-3624