Thickness 1/16", outside diameter 2.000 +0.015 -0.000, inside diameter 25/32", material txmm 100% tx material
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 5945-01-629-9013
NSN 5945-01-386-0499
NSN 6150-00-510-3439
NSN 5855-00-256-5562
NSN 5945-00-149-0619
NSN 5950-01-226-8422
NSN 6240-01-258-6298
NSN 5965-00-161-1512
NSN 5915-01-020-9153
NSN 7035-01-322-8180
NSN 5835-01-100-3265
NSN 5915-01-132-0634