No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6135-01-601-5818
NSN 6145-01-089-1658
NSN 6220-01-337-7165
NSN 5996-01-466-4577
NSN 5998-01-433-9971
NSN 5855-00-494-9581
NSN 5905-01-309-8033
NSN 5985-01-167-6582
NSN 6105-00-435-2713
NSN 5910-01-228-9752
NSN 5965-01-437-7148
NSN 6145-00-327-1954