A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Dept. of the Army 
Dept. of the Air Force 
Dept. of the Navy 
Brazil 
Spain 
Canada 
Italy 
Turkey Classification: Other articles of iron or steel not wire nesoi
NSN 5910-00-233-6473
NSN 5895-01-466-4780
NSN 5935-01-090-9113
NSN 5835-00-153-4100
NSN 5925-00-819-3985
NSN 5915-01-451-8975
NSN 5920-01-227-1877
NSN 5998-01-146-3157
NSN 5975-01-443-0253
NSN 5935-01-657-6597
NSN 5920-01-123-9358
NSN 6130-01-334-0131