18-8 stainless steel, id tolerance +-.3mm, od tolerance +-.05mm, thickness tolerance +-.013
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6130-01-324-9104
NSN 6240-01-170-3491
NSN 6685-01-276-3027
NSN 5999-00-814-9279
NSN 5950-01-564-5627
NSN 5915-01-624-5292
NSN 6135-01-140-8201
NSN 6650-00-834-9062
NSN 5996-00-213-7121
NSN 6105-01-400-4194
NSN 6110-00-008-1766
NSN 5950-00-356-0217