No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5996-01-495-0763
NSN 4140-00-978-9590
NSN 6130-01-250-9853
NSN 5975-01-291-0993
NSN 5905-00-356-2479
NSN 6620-00-197-5130
NSN 5915-01-237-2480
NSN 6240-01-485-1136
NSN 6110-01-179-3669
NSN 5920-00-430-3166
NSN 6645-01-180-6219
NSN 6610-01-559-1447