No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Made-up articles of textile material, nesoi
NSN 5905-01-286-2798
NSN 6150-01-021-9788
NSN 6320-00-213-0477
NSN 6150-01-141-4998
NSN 5999-00-964-4476
NSN 5935-01-371-2781
NSN 6620-01-285-0302
NSN 5855-00-631-4565
NSN 6240-01-322-5521
NSN 5950-00-156-2220
NSN 5999-01-455-1651
NSN 5998-00-221-3216