A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Dept. of the Air Force 
Dept. of the Navy 
Poland 
Israel 
Singapore 
Belgium 
Republic of Korea 
Netherlands 
Portugal 
Italy 
Denmark 
Norway 
Greece 
Turkey Classification: Bolts and bolts and their nuts or washers exported in the same shipment
NSN 5975-01-168-4374
NSN 5925-01-477-8316
NSN 5930-01-430-2510
NSN 5975-01-297-3455
NSN 5925-01-288-0025
NSN 6130-01-421-4296
NSN 5985-01-227-5524
NSN 5930-01-205-2943
NSN 6650-01-610-9238
NSN 5905-01-243-5599
NSN 5975-00-278-7437
NSN 7035-00-171-0804