Two threaded holes on second end, 0.375-24 unf rh 0.675 in deep on 1.000 in. Bolt circle
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5985-01-385-6632
NSN 6620-00-869-9307
NSN 5998-01-358-4484
NSN 5920-00-122-5278
NSN 5998-01-257-4251
NSN 5855-01-042-7990
NSN 5895-00-651-5986
NSN 2925-00-127-7828
NSN 6240-01-367-6561
NSN 6145-01-594-2389
NSN 6650-00-157-1691
NSN 5975-00-003-3407