A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Articles of natural cork, nesoi (excluding corks & stoppers)
NSN 5835-00-583-1316
NSN 7035-01-372-5006
NSN 6610-01-013-4937
NSN 5999-01-423-9396
NSN 5999-00-922-8368
NSN 5965-01-104-5102
NSN 6110-01-356-6937
NSN 5985-00-540-9460
NSN 5930-00-624-9608
NSN 7035-01-236-5743
NSN 6685-01-614-5295
NSN 6145-01-164-9638