No 1/4 flat washer .265 id; .354 od, 032th ss
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6220-01-028-4488
NSN 5930-00-233-5935
NSN 5905-01-108-9177
NSN 6320-00-925-0558
NSN 5965-00-964-1756
NSN 5930-01-445-0297
NSN 5835-00-931-5568
NSN 6150-01-315-3291
NSN 5990-01-013-8464
NSN 6105-01-135-6964
NSN 7035-01-399-5354
NSN 5935-01-094-6372