Color natural
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5910-01-278-9009
NSN 5895-01-442-6518
NSN 5965-01-348-5997
NSN 6150-00-237-6043
NSN 6220-01-571-7526
NSN 5915-01-197-6218
NSN 5985-00-051-7499
NSN 5960-01-558-7787
NSN 6610-01-416-2738
NSN 6240-00-518-3541
NSN 5999-01-317-3192
NSN 5915-00-152-7517