No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5920-00-201-4914
NSN 6220-01-381-1793
NSN 5998-01-544-9784
NSN 5960-01-278-9394
NSN 5965-00-067-0290
NSN 5915-01-390-2625
NSN 5990-01-443-2931
NSN 6610-01-590-7222
NSN 5985-00-145-7786
NSN 6110-01-447-2770
NSN 5905-01-593-6444
NSN 2925-01-354-1752